
The LE9400 Extension Unit (EU) connects the baseband unit and radio units through optical fiber. It extends connections from an upstream BBU or EU to multiple RUs and supports cell combination and cell splitting.
The EU uses a modular, standard 19-inch, 1U design. It can be installed indoors, in a service riser, or in a protected outdoor cabinet. External interfaces and indicators are concentrated on the front panel, while the power and ground connections are located on the rear panel.
Product Interfaces and Indicators
| Port / Identifier | Type | Description |
|---|---|---|
| OPT21 / 5G NR | SFP+ | 10G optical port for BBU connection. |
| OPT22 / CAS | SFP+ | 10G optical port for connection to a secondary EU. |
| OPT23 / 4G | SFP+ | 10G optical port for BBU connection. |
| OPT24 | SFP+ | Reserved 10G optical port. |
| OPT1–12 | SFP+ | 10G optical ports for RU connections. |
| PWR1–12 | PWR | Remote power supply ports for RRUs. |
| RJ31 / Dubug | RJ45 | Standard Gigabit Ethernet local debug port. |
| TRIGER | Trigger interface | Instrument testing. |
| AC220 | Power supply | AC power input. |
| POWER | Indicator | Steady on indicates power input and normal equipment operation. |
| 1588 | Indicator | Steady on indicates that the EU system clock is synchronized with the BBU via 1588. |
| HUB2 | Indicator | Steady on for a level 1 EU. |
| HUB1 | Indicator | Steady on for a level 2 EU. |
| GND | Ground | Ground connection. |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Rated voltage | 100 V / 220 V AC |
| Dimensions (W × D × H) | 440 × 380 × 45 mm |
| Operating bandwidth | 100 MHz |
| Operating temperature | −5°C to +55°C |
| Storage temperature | −40°C to +70°C |
| Relative humidity | 15%–85% RH |


