


The Carrier Point of Interconnect (CPOI) is a modular passive RF interface used to connect and condition signals from radio base stations and other RF sources before distribution through an in-building wireless system. It can support attenuation, splitting and the integration of multiple RF services.
The table presents reference capabilities from a publicly documented modular CPOI family. Card type, frequency range, attenuation, connectors and capacity vary with the selected configuration and must be confirmed for each project.
| Category | Item | Specification |
|---|---|---|
| General | Product Type | Modular Carrier Point of Interconnect |
| General | Architecture | 19-inch modular sub-rack |
| General | Reference Capacity | Up to 8 card slots and 16 RF services |
| Functions | Supported Functions | RF attenuation and signal splitting |
| Attenuation Card | Frequency Range | 600–2700 MHz or 600–4000 MHz, card dependent |
| Attenuation Card | Attenuation Options | 10 / 20 / 35 dB |
| Attenuation Card | VSWR | ≤ 1.35 |
| Attenuation Card | PIM3 | ≤ −160 dBc @ 2 × 43 dBm |
| Attenuation Card | Maximum Input Power | 80 W per port |
| Splitter Card | Frequency Range | 600–2700 MHz or 1700–4000 MHz, card dependent |
| Splitter Card | Insertion Loss | ≤ 3.6 dB or ≤ 3.7 dB, card dependent |
| Splitter Card | VSWR | ≤ 1.3 |
| Splitter Card | PIM3 | ≤ −110 dBc @ 2 × 30 dBm |
| Splitter Card | Maximum Input Power | 2 W per port |
| Electrical | Impedance | 50 Ω |
| Configuration | Power Options | AC or DC for fans and alarms |
| Configuration | Final Selection | Cards, connectors, band plan and capacity are project configurable |